High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9% |

Cuprous Oxide CuO powder:
Copper oxide states : The oxidation state of Copper is +1 or +2.
Copper (II) Oxide is an organic substance with CuO. It is a dark copper oxide, somewhat amphiphilic but slightly hygroscopic. Copper oxide has a weak base.
Black copperoxid is CuO. Red copperoxid Is Cu2O.
Copper oxide can be almost insoluble when mixed with water and alcohols. However, copper oxide disintegrates slowly in ammonia but fast in ammoniumcarbonate solution. The alkali-metal cyanides dissolve copper oxide quickly. Ammonium carbonate solution dissolves it rapidly.

Copper Oxide is used primarily to produce rayon, ceramics glaze, enamel, petroleum desulfurizes pesticides and batteries. Also, it can be used in the production of hydrogen, catalysts, green glass, and other related products.
Cu oxideCuO is made on large scales by pyrometallurgy. It is an intermediate step in the extraction of copper from ore. An aqueous mixture containing ammonia, ammonia, and oxygen is applied to the ore. This results in copper (I) and (II), amino complexes that are then extracted from the material. The steam is used to decompose these complexes and produce CuO.
The precursor to many copper-containing products like ceramics and wood preservers is cupric oxide. Ingestion, inhalation and dermal exposure are the most common routes for cupric oxide exposure in adults. Copper(II), oxide nanoparticles (NPCuO) are useful in the industrial sector as antimicrobial agent in textiles, paints, and as catalysts for organic synthesis. You can also make them from electronic scraps. Because cupric oxide is toxic, muta and generates reactive oxygen compounds, it can cause potential environmental and health problems.

Copper oxide for sale:
To receive the latest copperoxide price, please send us an inquiry.

Performance Copper Oxide CuO Pulp:
Copper oxide is not soluble or soluble with water, ethanol and acid. It can also be soluble in potassium chloride, ammonium chlorineide and potassiumcyanide solutions. The copper oxide can react with many bases and slowly dissolves in ammonia solutions. The main uses of copper oxide are to make rayon, ceramics glaze and enamel as well batteries, petroleum desulfurizes. Insecicides, hydrogen production catalysts, etc.

Technical Parameter Copper Oxide CuO powder:

Product	The Nuclear cdh857 CuO powder is 200mesh
Chemical Property (%)						Physical Property
CuO	So42	Fe	Cl	Ni	Pb	Loose Density (3g/cm3)	Dimensions in Part (mesh)	Form
99.27	0.08	0.022	0.013	0.0024	0.04	1.54	-200	Powder

What is Copper Oxide CuO Powder made of?
Copper oxide is produced in a variety of ways.
1. Copper powder oxidation technique
Copper ash, copper slag are used as raw materials. They then undergo preliminary oxidation with coal gas. The heat is to evaporate moisture from the materials and remove organic impurities. It is then naturally cooled and pulverized to make crude copper oxide. After adding the crude copper dioxide to the reactor, it is heated and stirred until the ratio of liquid to sulfuric acid doubles. At that point, the pH value of the solution will be 2 or 3. Under heating and stirring, copper oxide can be added to the reactor. After that, it is washed in hot water with no iron or sulfate. Centrifugal separation is followed by drying and oxidation roasting at 350°C for 8 hours. Cooling, crushing to 100 meshes then oxygenation in an oven to produce copper oxide powder.
2. Nitration copper wire, copper powder
The copper wire and copper powder should be dissolved in 6mol/L Natric Acid to prevent the copper from being in excess. To remove iron hydroxide precipitate from the solution, raise the pH to 3-4. Mix the solution with 10% (massive) sodium carbonate to bring it to boiling. After alkaline salt has precipitated, remove the supernatant and wash well with water. Filter it then dry. The dried basic copper carbonate is heated and decomposed into black copper oxide powder under a small fire with sufficient stirring: CuCO3*Cu(OH)2=2CuO+CO2|+H2O
Once no carbon dioxide remains, decomposition will be complete.
3. Thermal decomposition of copper nitrate
Dilute nitric acids is used to dissolve the electrolytic copper. It’s then evaporated on a water bath to dry it, before being heated very slowly in a dehydrator from 90 to 120 degrees Celsius. After the formation of soft basic salt, the water is first boiled and then filtered to dry it. Next, it’s slowly heated up to 400 for most of the sodium. Finally, it is crushed at 850 for 1h and then decomposed into oxidation. You can further enhance the process by pulverizing the product again and heating it at 700°C for about an hour. Then, place the product in a desiccator to cool.
4. Conductive water dissolution method
Use conductive water to dissolve high-purity copper Nitrate. Filter the solution, then add extra high-purity NaH3*H2O. After filtering, use high purity nitric to neutralize the filtrate. Filter, use conductive water to wash the filtrate once, then add high-purity ammonium Carbonate to precipitate coppercarbonate. After drying, turn off the oven and dry at 200°C for about 3-4 hours.
5. Method for thermal decomposition copper carbonate
For complete dissolution, place copper powder and copper wire under a fume hood containing as low as 6mol/L Nitric Acid as you can. Filter the solution if the solution becomes too opaque. To create black basic salt precipitation, sodium carbonate is boiled with the copper solution. After the solid settles completely, drain the excess liquid and filter it. Dry by decanting. Place it in an evaporating tray and heat on a small flame with enough stirring to turn it into copper oxide.

Copper Oxide Uses:
Copper(II) Oxide is an important product of copper mining. It’s the base for production of other copper salts. Many wood preservers, for example, are made from copper oxide.
Cupric oxide is used to make ceramics in the colors blue, red and green. Sometimes, gray, pink or black glazes are also produced.
Also, it is not recommended to be used in livestock feeds as an dietary supplement. Copper is not absorbed due to its low bioactivity.
It can also be used for welding copper alloys.
An early form of the Edison-Lalande type battery included a copper dioxide electrode. Copper oxide could also be used to make a type of lithium battery.
Copper(II)oxid can also be used in catalysis and superconductivity; ceramics; catalyst carriers; electrode activity material;
glass, colourants of porcelain, polishing agent for optical glasses, oil to desulfurize; propellant rocket fuel speed catalyst.

CuO Powder in Storage:
CuO Powder of Copper Oxide CuO should be kept in a dry, cool, and sealed environment. It should not be exposed to the air.

Shipping and Packing of Copper Oxide CuO powder:
You can pack it in two plastic bags with the inside.
Packaging of copper oxide cuO powder in vacuum packaging, 100g to 500g, or 1kg/bag at 25 kg/barrel. Or as you request.
Copper Oxide CuO powder shipping shipping: could be shipped by sea or air as soon as payment receipt is received.

Technology Co. Ltd. (), is a trusted supplier and manufacturer of chemical materials worldwide. We have more than 12 years experience providing high-quality chemicals, Nanomaterials, and boride powders.
Send us an inquiry if you’re looking for copper oxide powder of high quality. ([email protected])