High Purity Aluminum Silicide AlSi2 Powder, 99% |

Aluminum Silicide AlSi2 Pulver:



Alloys of aluminum and silicon

Aluminium-silicon alloy is an alloy made by forging or casting aluminum with silicon as its major components. The average silicon content is 11 percent. A small amount of iron and copper are also added to improve the strength. The density of the material is approximately 2.62.7. It is around 2.62.7 g/cm3. The thermal conductivity of the material is 101126W/(m*), Young’s modulus 71.0GPa. Impact value 78.5J. Fatigue limit +-45MPa.

Because of its light weight, high thermal conductivity, certain strength and hardness as well as corrosion resistance

AI-Si Alloys

These are commonly used in automotive manufacturing and machine building to create parts that can be used under sliding friction conditions.

The

aluminum-silicon alloy

It forms a binary phase in 11.7% of silicon, with a melting points of 577degC. Both phases can be described as silicon solid solutions of aluminum and silicon solid solutions of aluminum at room temperature. There is no intermetallic compound. You can add sodium in very small quantities to increase strength, eutectic, and harden the dispersion. Although iron is not a very good choice, it can significantly reduce toughness. However, manganese may be used to mitigate this.

Al-Si alloy

This is an industrial metal that’s very valuable.

Aluminium silicide

This metal is extensively used in the construction of automobiles, aircraft, transport, and construction industries. This is used for making low- or medium-strength castings of complex shapes like brackets and motor housings. Brazing solder is also made from racks. It is a typical eutectic alloy with a simplified phase diagram. No intermediate compounds are made. This alloy offers high casting performance, low cost and good specific strength. It is an element in the third group of elements, with silicon being a semiconductor element. The difference between them is small.

To receive the latest information, send us an inquiry

aluminum disilicide price

You can buy here

Aluminium silicicide AlSi2 Aluminum powder

In bulk.

The Product Performance of AlSi2 Aluminum Silicide Powder


Aluminum silicide AlSi2 (powder) is an alloy from silicon and aluminium. The aluminum silicide, which is often in the form of powder, is used as a material raw material for powder metalurgisty. Aluminum silicide is formed at high temperatures into a liquid and then pressed into different products.

Technical Parameters of AlSi2 Powder Aluminum Silicide:

Name of Product	MF	Purity	Particle Size	Melting Point	Density	The color of the sky
Silicide of aluminum	AlSi2	99%	5-10um	1400	2.7g/cm3	gray-black

Chemical composition of AlSi2 Powder Aluminum Silicide:

AlSi2	Al	Si	Fe	Ca	S	P	C
99%	70%	Balance	0.2%	0.1%	0.02%	0.05%	0.02%

It is simple.


Aluminum silicicide AlSi2 Powder


produced?


An electrothermal process for making aluminum-silicon alloy is at around 2000C. Alumina and silicon oxide, which are liquids during the metallurgical processes, are reduced by a carbonaceous agent. The maximum temperature the submerged arcane can achieve is usually about 1350 2200degC.

Applicaciones


Aluminum Silicide AlSi2 (Powder)


The ductility of an aluminum-silicon alloy is best when it has a low silicon content (such 0.7). It is also more malleable and can often be used as deformed alloy. But, when it has a higher silicon content (such 7%), it fills the melt better and is frequently used in the production of Cast alloy.

When the aluminum-silicon alloys have a silicon content greater than 12.6% (silicon particle content as high as 14.5% or 25%), adding some Ni, Cu, Mg, and other elements to the alloy can increase Its complete mechanical properties.

These can be replaced by cast iron cylinders for a significant weight reduction. You can electrochemically treat the aluminum-silicon cylinder to remove the surface aluminum, retain primary silicon dots embedded within the inner wall and improve its wear and scratch resistance.

Due to its low weight and corrosion resistance, an alloy with between 11%-13% silicon content is one of the top piston materials.

1). Powder metallurgy materials made of aluminum silicide, AlSi2 (powder) are used. The silica at high temperatures is able to form into a molten state, which can then be pressed into many different products.

2). AlSi2 aluminum silicide powder is used for the production of low strength castings in complex shapes, like bracket, cover, and motor shell.

3). As brazing solder, AlSi2 silicide AlSi2 is used.

Shipping and Packing of Aluminum Silicide AlSi2 Pulver:


We offer many packing options that are dependent on the amount of aluminum silicide, AlSi2 Powder.

Powder packaging of aluminum silicide AlSi2


You can vacuum pack 1kg per bag, 25kg/barrel or according to your requirements.

Aluminium silicide AlSi2 Powder shipping


Could be sent by sea, by air, or by express once payment receipt is received.

Technology Co. Ltd. (), is a trusted supplier and manufacturer of chemical materials worldwide. We have more than 12 years experience providing high-quality chemicals, Nanomaterials, and other super high-quality products, such as graphite powders, boride powders, nitride & graphite powders, sulfide powders, 3D printing powders, etc.

High-quality products are what you want

Al


Si2


Pulver

Please feel free and contact us to send an enquiry. ([email protected])