Purity: 99.99%
Antimony Sulfide Sb2S3 Pulver:
Sulfide refers to bismuth or black-gray crystallization or powder. The open air can cause template oxidation. Also, it is soluble in a concentrated hydrochloric and hydrogen sulfide solutions. Pure triforium Sulfide (non-shaped) is insoluble in water and acetic Acid. In the firecrackers and fireworks, sulfur hydrazine is made as hydrazine other powder. This black powder has a metal gloss. poisonous.
Although the trioxidant can remain stable at room temperatures, it is possible to obtain the equivalent oxide in the atmosphere or by reducing the amount of H2 or Fe.
It is made up of bismuth that has been dissolved in concentrated hydrochloric acids.
SB2S3 + 6H + 8Cl – 2SBCL4- + 3H2S |
For Sale: Antimony Sulfide
To receive the latest information, send us an inquiry Antimony Sulfide Prices Please fill out the form below if you wish to buy Antimony Sulfide powder Sb2S3 Powder In bulk.
Produkt Name: Antimony Sulfide ; antimony sulphide
Formula chemical for antimony sulfide : Sb2S3
Antimony Sulfide molecular weight: 339.68
Antimony Sulfide density : 4.12g/cm3
Antimony Sulfide Melting point : 550
Antimony Sulfide boiling Point: 1080
Antimony Sulfide hardness HB2-2.5
Antimony Sulfide Uses :
A wide range of uses in friction equipment, glass rubber and military gunpowder. It can be used as an additive, catalyst or moisture-proof agent as well as heat stabilizer.
Antimony Sulfide Sb2S3 Pulp CAS 1314_87-0 Analysis
Antimony Sulfide Sb2S3 Pulver: What’s the deal? produced?
There are three types of preparation: Direct synthesis, Antimony Transformation Method and Natural Mine Processing Law.
Mining law
Natural Hui Bismuth Mine is used for screening, crushing, and other processing of sulfide-finished products.
Conversion method for bamboo white
Reaction equation:
SB2O3 + 4NA2S+ CA (OH), 2 + 3H2O SB2S3+ 8NAOH + CONCAS
Instructions for operation: 1.80 kg SB2O3, Ca (OH), 20.6 kg and H2O6kg were mixed and heated for 1 hour at 80°C. 2.41 kg of 60% N2S was then dissolved into 3L water to form a Na2S solution. The Na2S solution was then added to the above mixture, stirring for 30 minutes. Next, 30% HCl was added to the mix to acidify it to pH 0.4 within 3 hours. After cooling and drying the mixture, SB2S3 was prepared.
Direct Synthesis
Reaction equation:
3S + 2SB – SB2S3
Instructions for operation: After melting the metal, ruthenium the sulfur vapour is introduced. The resulting sulfide compound is immediately converted into trioxide. A 103%-115% amount of sulfur was used in the mixture. Stirring took 0.3 to 1h and temperature was kept at 650 to 805 deg C.
Applicaciones Antimony Sulfide Sb2S3 Powder:
It is used mainly to create matches and fireworks as well as all sorts of antimony salts, colored glasses and other products. It is also used in the rubber industry as a vulcanizer. The rubber can be used in optoelectronics, where it has good applications prospects for photochemical and solar cell chemistry. Manufacturing of fireworks, glass and explosives as well as paint pigments.
Antimony Sulfide Sb2S3 powder storage conditions:
Sb2S3 powder dispersion performance, and the use effects of damp reunion are affected. Antimony Sulfide Sb2S3 should therefore be stored in vacuum packed and kept dry. Antimony Sulfide Sb2S3 Dust cannot be air-exposed. Antimony Sulfide Sb2S3 Powder shouldn’t be exposed to stress.
Shipping Antimony Sulfide powder Sb2S3 Powder
We offer many packing options that are dependent on the Antimony Sulfide Sb2S3 Pulver quantity.
Antimony Sulfide sb2S3 powder packing:vacuum packed, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
Antimony Sulfide SB2S3 powder shipping: Could be sent by sea, air or express as soon after receipt of payment.
Luoyang Tongrun Nano Technology Co. Ltd.
High-quality products are what you want antimony sulfide powder Please feel free and contact us to send us an inquiry. ([email protected])
Sulfide refers to bismuth or black-gray crystallization or powder. The open air can cause template oxidation. Also, it is soluble in a concentrated hydrochloric and hydrogen sulfide solutions. Pure triforium Sulfide (non-shaped) is insoluble in water and acetic Acid. In the firecrackers and fireworks, sulfur hydrazine is made as hydrazine other powder. This black powder has a metal gloss. poisonous.
Although the trioxidant can remain stable at room temperatures, it is possible to obtain the equivalent oxide in the atmosphere or by reducing the amount of H2 or Fe.
It is made up of bismuth that has been dissolved in concentrated hydrochloric acids.
SB2S3 + 6H + 8Cl – 2SBCL4- + 3H2S |
For Sale: Antimony Sulfide
To receive the latest information, send us an inquiry Antimony Sulfide Prices Please fill out the form below if you wish to buy Antimony Sulfide powder Sb2S3 Powder In bulk.
Produkt Name: Antimony Sulfide ; antimony sulphide
Formula chemical for antimony sulfide : Sb2S3
Antimony Sulfide molecular weight: 339.68
Antimony Sulfide density : 4.12g/cm3
Antimony Sulfide Melting point : 550
Antimony Sulfide boiling Point: 1080
Antimony Sulfide hardness HB2-2.5
Antimony Sulfide Uses :
A wide range of uses in friction equipment, glass rubber and military gunpowder. It can be used as an additive, catalyst or moisture-proof agent as well as heat stabilizer.
Antimony Sulfide Sb2S3 Pulp CAS 1314_87-0 Analysis
Purity | Zn | Ag | Cu | Al | Mg | Fe | Bi | Sb | As |
99.99% | 5ppm | 2ppm | 5ppm | 5ppm | 5ppm | 5ppm | 5ppm | 5ppm | 5ppm |
Antimony Sulfide Sb2S3 Pulver: What’s the deal? produced?
There are three types of preparation: Direct synthesis, Antimony Transformation Method and Natural Mine Processing Law.
Mining law
Natural Hui Bismuth Mine is used for screening, crushing, and other processing of sulfide-finished products.
Conversion method for bamboo white
Reaction equation:
SB2O3 + 4NA2S+ CA (OH), 2 + 3H2O SB2S3+ 8NAOH + CONCAS
Instructions for operation: 1.80 kg SB2O3, Ca (OH), 20.6 kg and H2O6kg were mixed and heated for 1 hour at 80°C. 2.41 kg of 60% N2S was then dissolved into 3L water to form a Na2S solution. The Na2S solution was then added to the above mixture, stirring for 30 minutes. Next, 30% HCl was added to the mix to acidify it to pH 0.4 within 3 hours. After cooling and drying the mixture, SB2S3 was prepared.
Direct Synthesis
Reaction equation:
3S + 2SB – SB2S3
Instructions for operation: After melting the metal, ruthenium the sulfur vapour is introduced. The resulting sulfide compound is immediately converted into trioxide. A 103%-115% amount of sulfur was used in the mixture. Stirring took 0.3 to 1h and temperature was kept at 650 to 805 deg C.
Applicaciones Antimony Sulfide Sb2S3 Powder:
It is used mainly to create matches and fireworks as well as all sorts of antimony salts, colored glasses and other products. It is also used in the rubber industry as a vulcanizer. The rubber can be used in optoelectronics, where it has good applications prospects for photochemical and solar cell chemistry. Manufacturing of fireworks, glass and explosives as well as paint pigments.
Antimony Sulfide Sb2S3 powder storage conditions:
Sb2S3 powder dispersion performance, and the use effects of damp reunion are affected. Antimony Sulfide Sb2S3 should therefore be stored in vacuum packed and kept dry. Antimony Sulfide Sb2S3 Dust cannot be air-exposed. Antimony Sulfide Sb2S3 Powder shouldn’t be exposed to stress.
Shipping Antimony Sulfide powder Sb2S3 Powder
We offer many packing options that are dependent on the Antimony Sulfide Sb2S3 Pulver quantity.
Antimony Sulfide sb2S3 powder packing:vacuum packed, 100g to 500g or 1kg/bag at 25kg/barrel. Or as you request.
Antimony Sulfide SB2S3 powder shipping: Could be sent by sea, air or express as soon after receipt of payment.
Luoyang Tongrun Nano Technology Co. Ltd.
High-quality products are what you want antimony sulfide powder Please feel free and contact us to send us an inquiry. ([email protected])
Antimony Sulfide Properties |
|
Related Names |
antimony(III) sulfide, antimony trisulfide, amtimony trisulphide,
Sb2S3 antimony sulphide powder |
1345-04-6 | |
Compound Formula | Sb2S3 |
Molecular Weight | 339.72 |
Appearance | Dark Gray to Black Powder |
Melting Point | 550 |
Boiling Point | 1150 |
Density | 4.64 g/cm3 |
Solubility of H2O | Insoluble |
Exact Weight | 339.724246 |
Titanium Sulfide Safety & Health Information |
|
Signal word | Danger |
Hazard Statements | H302-H331 |
Hazard Codes | T |
Risk Codes | N/A |
Safety statements | N/A |
Transport Information | UN 1549 6.1/PG II |
Inquiry us