High Purity Aluminum Nitride AlN Powder CAS 24304-00-5, 99.5% | Cataniadagiocare

About Aluminum Nitride AlN powder
Similar to other semiconductors. aluminum nitride Powder is great for making sintered body. This powder is very thermally conductive, has good electrical insulation and excellent thermal expansion.
Aluminum nitride melts at 2200 degrees Celsius in an environment that is inert. AlN can also be reduced in vacuum to approximately 1800°C. 700°C is the ideal temperature for surface oxidation in air. An oxide layer with thicknesses of 5-10 nanometers was observed on the surface material at room temperature. The material can be protected up to 1370°C by this oxide layer. The bulk oxidation process occurs at higher temperatures. Aluminum nitride can be used up to 980°C in hydrogen and carbon dioxide atmospheres.
The aluminum nitride cte It’s lower than for beryllium oxide or alumina oxide. The coefficient of thermal expansion is 4.5*10-6/degC.
The grain boundary erosion of inorganic or strong acids causes it to slowly dissolve. Alkali dissolves the aluminum nitride material as it is eroded by the particles. Aluminum nitride has the ability to resist most molten sodiums including chlorine and cryolite.

Globally trusted Aluminum Nitride producer Aluminum Nitride supplier. For the most current information send an inquiry Aluminum nitride price Aluminum Nitride AlN Powder can also be purchased wholesale.

Aluminum Nitride properties:
Aluminium nitride is powder that we sell (CAS-24304-00-5). It has a high purity and ultrafine texture, as well as an evident insulation heat conduction property.

It is easy. Aluminum Nitride AlN powder Produced ?
Thermal Spraying: To create electrically and thermallyconductive coatings, you can thermal spray aluminum nitride particles.
Chemical/Physical Vapor Deposition (CVD/PVD): Aluminum nitride coating To create thermally conductive and electrically-insulating coatings, s are either deposited via PVD or CVD.
Powder Metallurgical (P/M), A powder made of aluminum that is used to make components. It can be pressed by either cold or hot pressing as well as sintering.

Specification:
Product Name: aluminum nitride;
Purity: 99.9%;
Particle size: Spintering 3-3um, 5-3um and 6um
filler———-1-3um, 3-5um, 6-10um, 25um;

Composition of the aluminum Nitride Powder AlN

AlN	N	Fe	Mn	O	C	Ca	Si	Ni
>99.9%	>=32%	0.04	0.0005	<=0.42	0.02	<=0.009	<=0.045	0.0002

Application AlN powder

The Aln Aluminium Nitride non-metallic, organic material has excellent thermal conductivity. It is similar to a diamond. The coefficient of thermal expansion is low. This makes it a good thermal shock material. This crucible is great for melting pure iron or aluminum. It is highly resistant to molten metal corrosion. You can use aluminum nitride as an excellent electrical insulation. Aluminium nitride is also a good choice for manufacturing electrical components.
1. Produce the integrated circuit foundation plates for the optical device, electronic device, and radiator.
2. Thermoconductive silicon, and thermoconductive epoxy.
3. Nano-lubricant and antiwear agent
4. Plastics that are thermoconductive at high temperatures
A thin-film epitaxially-grown of crystalline al Nitride is used (SAWs), because AlN exhibits piezoelectric properties. An example of an RF filters that are widely used in smartphones is the thin-film bulk Acoustic Resonator. These types of MEMS devices use aluminum nitride and two layers.
AlN can be used as an alkaline material in piezoelectric or micromachined ultraviolet transmitters. The ultrasonic signals can be received and emitted from the receivers and used indoors for rangefinding to up 1 meter.

Aluminium nitride glaze ceramics can be used for electrical equipment. Aluminium nitride-ceramics can withstand most molten metallics like copper, lithium and aluminum.
These aluminum nitride sheet can also be used as power modules or IGBT, MOSFET and/or LED packages.

Packing & Shipping of AlN Pulp :
There are many options for packing, depending on the quantity of AlN powder.
Aluminium nitride and AlN powder packaging in vacuum: 100g/bag, 500g/bag, 25kg/barrel. Other options available.
AlN Shipping: Aluminium Nitride Powder AlN Shipments can be made by Sea or Air as soon the payment receipt is received.



Nanotechnology Co. Ltd., an international trusted supplier and manufacturer high-quality chemical substances, is known for its 12 year-long experience in Nanomaterials, such as Boride, Nitride, graphite or sulfide.
We can help you find high-quality AlN powder. Send an inquiry ([email protected])